Data from 20201129 ------------------ https://www.hep.lu.se/eudet/pictures/mcmtests/20201129/ Pulser runs How shaping time influence the pulse: gain0 - shaper0,1,3,7 0 ch1-2000-1-34977.pdf 1 ch1-2000-1-34978.pdf 3 ch1-2000-1-34979.pdf 7 ch1-2000-1-34980.pdf How gain influence the pulse: gain3,2,1,0 - shaper0 3 ch1-2000-1-35055.pdf 2 ch1-2000-8-35057.pdf 1 ch1-2000-1-35056.pdf 0 ch1-2000-1-35058.pdf Do not have other combinations of gain/shapertimes with pulser. Data from 20201121 ------------------ https://www.hep.lu.se/eudet/pictures/mcmtests/20201121/ pedestals gain0,1,2,3 shaper0 But not all chips tested. Data from 20201114 ------------------ Pedestals chip 4-7. gain0 shaper 0,7 Do not have any pedestals with shaper 1,3 or chip 0-3 with other shapertimes than 0. Data from 20201206 ------------------ https://www.hep.lu.se/eudet/pictures/mcmtests/20201206/ MCM2 Pedestals with 1000 time sweep, between time slice 200 and 1000 to avoid "hill". gain0 shaper0 gain3 shaper0 do not have any pedestals with gain1,2 GAIN0 SAHPER0 plots for each chip, 16 channels. ch-chip2000-200-1000-pedchip0x-35094-gain0-shaper0.pdf ch-chip2001-200-999-pedchip0x-35102-gain0-shaper0.pdf ch-chip2002-200-998-pedchip0x-35110-gain0-shaper0.pdf ch-chip2003-200-997-pedchip0x-35118-gain0-shaper0.pdf ch-chip2004-200-1000-pedchip0x-35126-gain0-shaper0.pdf ch-chip2005-200-999-pedchip0x-35134-gain0-shaper0.pdf ch-chip2006-200-998-pedchip0x-35142-gain0-shaper0.pdf ch-chip2007-200-997-pedchip0x-35150-gain0-shaper0.pdf GAIN3 SAHPER0 plots for each chip, 16 channels. Note: due to the settings of reference voltages have some channels the baseline below zero. ch-chip2000-200-1000-pedchip0x-35158-ped-gain3-shaper0.pdf ch-chip2001-200-999-pedchip0x-35166-ped-gain3-shaper0.pdf ch-chip2002-200-998-pedchip0x-35174-ped-gain3-shaper0.pdf ch-chip2003-200-997-pedchip0x-35182-ped-gain3-shaper0.pdf ch-chip2004-200-1000-pedchip0x-35190-ped-gain3-shaper0.pdf ch-chip2005-200-999-pedchip0x-35198-ped-gain3-shaper0.pdf ch-chip2006-200-998-pedchip0x-35206-ped-gain3-shaper0.pdf ch-chip2007-200-997-pedchip0x-35214-ped-gain3-shaper0.pdf pedestals for all channels on mcm: mcm2-pedestals-gain0-shaper0.pdf mcm2-pedestals-gain3-shaper0.pdf rms for all channels on mcm: mcm2-pedestalrms-gain0-shaper0.pdf mcm2-pedestalrms-gain3-shaper0.pdf rootfiles used: 20201206/rootfiles-35094.txt 20201206/rootfiles-35102.txt 20201206/rootfiles-35110.txt 20201206/rootfiles-35118.txt 20201206/rootfiles-35126.txt 20201206/rootfiles-35134.txt 20201206/rootfiles-35142.txt 20201206/rootfiles-35150.txt 20201206/rootfiles-35158.txt 20201206/rootfiles-35166.txt 20201206/rootfiles-35174.txt 20201206/rootfiles-35182.txt 20201206/rootfiles-35190.txt 20201206/rootfiles-35198.txt 20201206/rootfiles-35206.txt 20201206/rootfiles-35214.txt summary text file: ped-20201206.txt ped-gain3-shaper0-20201206.txt Time sweeps - 2dimensional plots each time slice and ADC value in a scatter plot. Show the spread around the average value for each time slice. (will change to minimize filesize). chipx2d-all-chip2000-35094-gain0-shaper0.pdf chipx2d-all-chip2007-35150-gain0-shaper0.pdf PULSER ------- Have 1000 timesweep with a ramp: https://www.hep.lu.se/eudet/pictures/mcmtests/20201107/ Plots are in the same directory GAIN0 SHAPER0 * 1000 samples, 20 kHz pulse on chip 2,0 connector side: Expect large signals on chip 0,1,2,3: chip0x-all-chip2000-evt10-pulser-10V-wire20.pdf NOTE: missed to take channels 12 and 13. Sorry. chip0x-all-chip2001-evt10-pulser-6V-wire20.pdf chip0x-all-chip2002-evt10-pulser-10V-wire20.pdf chip0x-all-chip2003-evt10-pulser-6V-wire20.pdf Single events for channel 0 in all chips: ch0-2000-2-34734.pdf ch0-2001-2-34734.pdf ch0-2002-2-34734.pdf ch0-2003-8-34742.pdf ch0-2004-2-34755.pdf ch0-2005-2-34772.pdf ch0-2006-7-34764.pdf ch0-2007-2-34781.pdf ch10-2007-2-34786.pdf (note channel 10)