#!/bin/bash
# 1 - chipnumber (as written on chip)
# 2 - Recall setup 1-4
source=3
if [ $# == 0 ]; then
    chipnumber=0
    recall=0
elif [ $# == 1 ]; then
    chipnumber=$1
    recall=0
elif [ $# == 1 ]; then
    chipnumber=$1
    recall=$2
else
    echo "Wrong number of arguments: " $#
    exit
fi
if [ $source == 0 ]; then
    source1=0
    source2=0
elif [ $source == 1 ]; then
    source1=1
    source2=0
elif [ $source == 2 ]; then
    source1=0
    source2=1
elif [ $source == 3 ]; then
    source1=1
    source2=1
else
    echo "Wrong source argument, must be 0-3 - Exiting"
    exit
fi
eventnb=4
#
# General settings
#===================
datadir=/home/jum/wdir/ilcdaq/data
#
# VXI settings
#=============
vxipath=$HOME/ilc/ilcdaq/chiptests/vxi11/bin
IP="192.168.4.10"
#
# select channel of pulsegenerator
#=================================
#SETUP1:
#USER1 : DC level
#USER2 : pulse for 12 and 16mV/fc = gain0 and gain2
#USER3 : 60% (12/20) of USER2 suitable 20 and 27mV/fC = gain1 and gain3
#USER4 : reverse polarity suitable for 12 and 16 mV/fc = gain0 and gain2
#SETUP2:
#USER1 : Sinus
#
#
# SRU and MCM general settings
#=============================
# shapers 0=120ns, 1=90ns ,3=60ns, 7=30 ns
dcladdress=0
chipaddress=7
shaper=0
polarity=1
mode=0
threshold=(0 0 0 0)
post=$((0 << 14))
pre=$((0 << 17))
above=$((0 << 12))
events=500
samples=`printf '%x' 1008`
channels=0
for register in {10..17}
do
    ./mcmwrreg --fec $dcladddress --register $register --write --value FFFF
done
mcmregister=`printf '%x' $((0x10 + $chipaddress))`
./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register A --channel 0 --write $samples --verify
./mcmwrreg --fec $dcladdress --register $mcmregister --write --value $channels
#
# set readout mode of SALTRO chip
#================================
# Init  0 into VFPED as pedestal value - to all channels and chip
for ch in {0..15}; do
    ./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register 13 --channel $ch --write 0 --verify
    ./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register 8 --channel $ch --write 0 --verify
done
# Load DPCFG with mode = f(t) - fpd = 10,  postsamples (0-7), presamples (0-3), above threshold (0-3)
# To set back to normal mode mode=0.
value=`printf '%x' $((mode + post +pre + above))`
./saltrowrrdreg --bcast --fec $dcladdress --chip $chipaddress --register B --channel 0 --write $value --verify
#
# Set pretriggers=0, buffers=4
./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register C --channel 0 --write 0 --verify
#
# Select pulse generator sources
#===============================
#select setup2
if [ $recall != 0 ]; then
    $vxipath/vxi11_send $IP "*RCL 2" # Sinus wave
    sleep 1
    if [ $source1 == 0 ]; then
	$vxipath/vxi11_send $IP "OUTPUT1:STATE OFF"
    else
	$vxipath/vxi11_send $IP "OUTPUT1:STATE ON"
    fi
    if [ $source2 == 0 ]; then
	$vxipath/vxi11_send $IP "OUTPUT2:STATE OFF"
    else
	$vxipath/vxi11_send $IP "OUTPUT2:STATE ON"
    fi
fi

for gain in {3..3}
do
    #
    # Create limit files
    cat <<EOF1 >plotchipbits.txt
# have no settings yet
EOF1

    datfile=`printf '%s/chip%d/saltro%d-bits-mcm%d-c%d-g%d-s%d-p%d-s%d.dat' $datadir $chipnumber $chipnumber $dcladdress $chipaddress $gain $shaper $polarity $source`
    echo "FILE= " $datfile
    ./mcmpca16 --fec $dcladdress --preamp 0 --gain $gain --shaper $shaper --shutdown 0 --polarity $polarity --write --verify
    time ./srureadout --fec $dcladdress  --rate 0 --data ${mydata}${datfile} --event $events --softtrigger --sruif enp3s0
    if [ ! -f "$datfile" ]; then
	echo "ERROR: $datfile does not exist - exiting" >&2
	exit
    fi
    
    ./sruunpack --data ${datfile} --root --dump > bits.out
    rootfile=`printf 'chip%d/saltro%d-bits-mcm%d-c%d-g%d-s%d-p%d-s%d' $chipnumber $chipnumber $dcladdress $chipaddress $gain $shaper $polarity $source`
    if [ ! -f "${datadir}/${rootfile}.root" ]; then
	echo "ERROR: $rootfile does not exist - exiting" >&2
	exit
    fi
    title=`printf 'g%d-s%d-p%d-s%d'  $gain $shaper $polarity $source`
    echo "FILE: ${datadir}/${rootfile}.root"
    ./plotchipbits.exe $eventnb $chipnumber $dcladdress $chipaddress ${datadir} ${rootfile} ${title}
    value=$?
    if [ $value -ne 0 ] 
    then
	echo "ERROR: ./plotchipbits.exe returned ${value} - exiting" >&2
	exit
    fi
    csvfile=${mydata}/${rootfile}.csv
    if [ $chipnumber != 0 ]; then
	if [ -f "${csvfile}" ]; then
            mydate=`date +%Y%m%d%H%M%S`
            echo "$csvfile exist" $mydate
            destfile=${mydata}/${rootfile}-${mydate}.csv
            mv $csvfile $destfile
	fi
    else
	echo "TESTRUN - manage csvfile by hand"
    fi
    
done
exit