#!/bin/bash
# 1 - chipnumber (as written on chip)
source=3
if [ $# == 0 ]; then
    chipnumber=0
elif [ $# == 1 ]; then
    chipnumber=$1
elif [ $# == 2 ]; then
    chipnumber=$1
    source=$2
else
    echo "Wrong number of arguments: " $#
    exit
fi
if [ $source == 0 ]; then
    source1=0
    source2=0
elif [ $source == 1 ]; then
    source1=1
    source2=0
elif [ $source == 2 ]; then
    source1=0
    source2=1
elif [ $source == 3 ]; then
    source1=1
    source2=1
else
    echo "Wrong source argument, must be 0-3 - Exiting"
    exit
fi
eventnb=1
#
# General settings
#===================
datadir=/home/jum/wdir/ilcdaq/data
#
# VXI settings
#=============
vxipath=$HOME/ilc/ilcdaq/chiptests/vxi11/bin
IP="192.168.4.10"
#
# select channel of pulsegenerator
#=================================
#USER1 : DC level
#USER2 : pulse for 12 and 16mV/fc = gain0 and gain2
#USER3 : 60% (12/20) of USER2 suitable 20 and 27mV/fC = gain1 and gain3
#USER4 : reverse polarity suitable for 12 and 16 mV/fc = gain0 and gain2
#
# SRU and MCM general settings
#=============================
dcladdress=0
chipaddress=7
shaper=0
polarity=0
mode=0
invert=$((0 << 4))
threshold=(0 0 0 0)
post=$((0 << 14))
pre=$((0 << 17))
above=$((0 << 12))
events=500
samples=`printf '%x' 1008`
channels=0
for register in {10..17}
do
    ./mcmwrreg --fec $dcladddress --register $register --write --value FFFF
done
mcmregister=`printf '%x' $((0x10 + $chipaddress))`
./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register A --channel 0 --write $samples --verify
./mcmwrreg --fec $dcladdress --register $mcmregister --write --value $channels
#
# set readout mode of SALTRO chip
#================================
# Init  0 into VFPED as pedestal value - to all channels and chip
for ch in {0..15}; do
    ./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register 13 --channel $ch --write 0 --verify
    ./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register 8 --channel $ch --write 0 --verify
done
# Load DPCFG with mode = f(t) - fpd = 10,  postsamples (0-7), presamples (0-3), above threshold (0-3)
# To set back to normal mode mode=0.
value=`printf '%x' $((mode + post +pre + above + invert))`
./saltrowrrdreg --bcast --fec $dcladdress --chip $chipaddress --register B --channel 0 --write $value --verify
#
# Set pretriggers=0, buffers=4
./saltrowrrdreg --fec $dcladdress --chip $chipaddress --register C --channel 0 --write 0 --verify
#
# Select pulse generator sources
#===============================
if [ $source1 == 1 ]; then
    $vxipath/vxi11_send_verify $IP "SOURCE1:FUNCTION USER4"
else
    $vxipath/vxi11_send_verify $IP "SOURCE1:FUNCTION USER1"
fi
if [ $source2 == 1 ]; then
    $vxipath/vxi11_send_verify $IP "SOURCE2:FUNCTION USER4"
else
    $vxipath/vxi11_send_verify $IP "SOURCE2:FUNCTION USER1"
fi
for gain in {0..0}
do
    #
    # Create limit files
    cat <<EOF1 >plotchippedsub.txt
# peaktypes min_mean max_mean max_rms
0.0 0.1 0.1
500.0 600.0 5.0
470.0 570.0 5.0
# pedestals min_mean max_mean max_rms
700.0 900.0 5.0
700.0 900.0 5.0
700.0 900.0 5.0
EOF1

    datfile=`printf '%s/chip%d/saltro%d-pulser-mcm%d-c%d-g%d-s%d-p%d-s%d.dat' $datadir $chipnumber $chipnumber $dcladdress $chipaddress $gain $shaper $polarity $source`
    echo "FILE= " $datfile
    ./mcmpca16 --fec $dcladdress --preamp 0 --gain $gain --shaper $shaper --shutdown 0 --polarity $polarity --write --verify
    time ./srureadout --fec $dcladdress  --rate 0 --data ${mydata}${datfile} --event $events --softtrigger --sruif enp3s0
    if [ ! -f "$datfile" ]; then
	echo "ERROR: $datfile does not exist - exiting" >&2
	exit
    fi
    
    ./sruunpack --data ${datfile} --root --dump > pedsub${polarity}.out
    rootfile=`printf 'chip%d/saltro%d-pulser-mcm%d-c%d-g%d-s%d-p%d-s%d' $chipnumber $chipnumber $dcladdress $chipaddress $gain $shaper $polarity $source`
    if [ ! -f "${datadir}/${rootfile}.root" ]; then
	echo "ERROR: $rootfile does not exist - exiting" >&2
	exit
    fi
    title=`printf 'g%d-s%d-p%d-s%d'  $gain $shaper $polarity $source`
    echo "FILE: ${datadir}/${rootfile}.root"
    ./plotchippedsub.exe $eventnb $chipnumber $dcladdress $chipaddress $polarity ${datadir} ${rootfile} ${title}
    value=$?
    if [ $value -ne 0 ] 
    then
	echo "ERROR: ./plotchippedsub.exe returned ${value} - exiting" >&2
	exit
    fi
    csvfile=${mydata}/${rootfile}.csv
    if [ $chipnumber != 0 ]; then
	if [ -f "${csvfile}" ]; then
            mydate=`date +%Y%m%d%H%M%S`
            echo "$csvfile exist" $mydate
            destfile=${mydata}/${rootfile}-${mydate}.csv
            mv $csvfile $destfile
	fi
    else
	echo "TESTRUN - manage csvfile by hand"
    fi
    
done
exit