Test with different sampling clocks
-----------------------------------
Single events with zoom in time samples:
mcm0-all-evtE-<runnb>-clkN-sS-zoomN.pdf
OBS s3 for clk2 do not exist, instead s1 and s2.

Single events full time sweep:
mcm0-all-evtE-0-sS-clkN.pdf

evt number E.

Pulse generatyor source S:
0 : no pulse
1 : even channels
2 : odd channels
3 : even and odd channels

Clocks ClkN:
0 : 20 MHz
1 : 10 MHz
2 :  5 MHz
3 : 40 MHz

Currents:
clk,shutdown + bias off, running
0, 0.367A, 3.05A
1, 0.258A, 2.9A
2, 0.203A,2.84A
3, 0.578A, 3.26A

NOTE:
5 MHz looks not good.
Channels are missing or found to  manyb times.

Channels found in 200 events:
  0 -  15:     133    133    133    133    133    133    133    133    133    133    133    133    133    133    133    133
 16 -  31:     133    133    132    132    132    132    132    132    132    132    132    132    132    132    131    131
 32 -  47:     131    131    131    131    131    131    131    131    131    131    131    131    131    131    131    131
 48 -  63:     131    131    131    131    131    131    131    131    131    131    131    131    131    131    131    131
 64 -  79:     131    132    134    143    166    160    166    177    196    186    231    229    254    303    366    345
 80 -  95:     423    418    418    390    493    548    447    506    600    681    641    599    485    473    358    336
 96 - 111:     300    317    315    282    291    264    257    219    190    172    161    160    151    170    156    154
112 - 127:     144    149    136    134    133    132    131    131    131    131    131    131    131    131    131    131

Data analyzed with a software threshold of ADC > 200 (same for all channels).
200 events per run.
Peaks are searched for.
Peaks is found if the width of ADC samples >= 200 is more than 1 (to avoid short spikes at softthreshold).
For clk0 one expect 12 peaks per event.
For clk1 one expects 12 peaks per event.
For clk2 one expects 12 peaks per event.
for clk3 one expects 5 peaks per event.


Histograms plots:
mcm13-2414-clkC-ped0-thr0-g0-s0-p1-s3-1-200-test-pulse.pdf
plot 1-8: distribution of ADC values > 200.
plot 9-16: MAX ADC value for all peaks found.
plot 17-24: time sample of the peak max values.
plot 25-32: number of time samples between peaks.
expect:
  clk0: 60
  clk1: 30
  clk2: 15
  clk3: 120
plot 33-40: width in time samples of all peaks.
  width should increase with the clock speed.

csvfiles:
mcm13-2414-clkC-ped0-thr0-g0-s0-p1-s3.csv
Average and rms values of above plots.

Comments:
clk3 have some spikes in plot 1-8 for specific ADC values.
clk0,1,3 have channel:chip7 chan10 with low peak values, capacitor has bad connection?
clk2 not well analyzed since it has corrupt data, channels missing in many events.