20150113
--------

Pictures of the short side with components for sampling clock

IMG_116-chip1.png chip 1
IMG_117-chip2.png chip 2
IMG_118.BMP chip 2
IMG_115-chip3.png chip 3

mounted components from top to bottom:

4.7 nF clock termination
68 Ohm clock termination
100 nF AdcDigital decoupling

On chip2 and 3 should not the 4.7 nF clock termination be mounted.


Measured 
pad ----<|---- AdcDigital gnd (ball G2,H6-H9)

diod measurement
-              + on multimeter


                 chip  1   2   3
G18 aux clock          0.8 0.8 0.8
H20 Sampl clock        inf inf inf
H19 Clk Select         inf 0.8 0.8


value = 0.8 is interpreted as there is a connection to the chip,
inf that there is no connection



carrier1-bonded-20140131.pdf
pictures send by Johnny 20140131 on bonded chip.
On the pictures are no wired on the clock part.