[2019-04-16 12:32:19] ilcGetParameters: Message log started readout version READOUT-v10.0
[2019-04-16 12:32:19] dumpFileConfig: config file /home/jum/wdir/ilcdaq/config-v10.1/files.cfg
[2019-04-16 12:32:19] ilcGetParameters: run log started /home/jum/wdir/ilcdaq/log-v10.1/runlog
[2019-04-16 12:32:19] ilcGetParameters: trigger configuration /home/jum/wdir/ilcdaq/config-v10.1/trigger.cfg
[2019-04-16 12:32:19] readRunConfig: reading in run control config file /home/jum/wdir/ilcdaq/config-v10.1/run.cfg
[2019-04-16 12:32:19] ilcDaqConfig: reading in host run control config file /home/jum/wdir/ilcdaq/config-v10.1/daq.cfg
[2019-04-16 12:32:19] ilcDaqConfig: writing host run control config file /home/jum/wdir/ilcdaq/config-v10.1/daq.cfg
[2019-04-16 12:32:19] statusOfPcaSettings PCA16 settings read from: /home/jum/wdir/ilcdaq/config-v10.1/pca16.cfg

 CONSOLE RUNPARAMETERS
==============
Events: 0
Channel: 0 0
Channel: 1 0
Channel: 2 0
Channel: 3 0Timeout 499

==============
PEDESTAL SUBTRACTION 0
ZERO SUPPRESSION 0
LOGGING 1
CONTROL 1
CONFIG 1
ALTRO LOOKUP 2
ALTRO LOOKUP DESTINATION 1
ALTRO LOOKUP VERIFY 1
[2019-04-16 12:32:19] ilcSruActiveList: running with SRU config file /home/jum/wdir/ilcdaq/config-v10.1/sru.cfg
[2019-04-16 12:32:19] Interface: <eth0>, Address: <192.168.4.11> (C0A8040B), Broadcast: <192.168.4.255>
[2019-04-16 12:32:19] ilcSruActiveList:  ping sru_0 192.168.4.4 
[2019-04-16 12:32:19] ilcSruActiveList:  scSruScConnect returned with error 0
[2019-04-16 12:32:19] ilcSruActiveList:  dataSruScConnect returned with error 0
SRUID	STATUS	LINKUP	ACTIVE	CONTROLIP	PORT	LISTEN	READOUTIP
0	1	1	1	192.168.4.4	4097	4098	192.168.4.5
1	0	0	0	0.0.0.0	4097	4098	0.0.0.0
2	0	0	0	0.0.0.0	4097	4098	0.0.0.0
3	0	0	0	0.0.0.0	4097	4098	0.0.0.0
[2019-04-16 12:32:19] statusOfFecPower file: /home/jum/wdir/ilcdaq/config-v10.1/sru-0.cfg retstat = 0
[2019-04-16 12:32:19] statusOfFecPower file: /home/jum/wdir/ilcdaq/config-v10.1/sru-1.cfg retstat = 0
[2019-04-16 12:32:19] statusOfFecPower file: /home/jum/wdir/ilcdaq/config-v10.1/sru-2.cfg retstat = 0
[2019-04-16 12:32:19] statusOfFecPower file: /home/jum/wdir/ilcdaq/config-v10.1/sru-3.cfg retstat = 0
[2019-04-16 12:32:19] createThreads: creating monitor threads
[2019-04-16 12:32:19] connectclient: Addr 127.0.0.1 Port 2000
[2019-04-16 12:32:19] dbhandler: thread id 6511872 starting server on port 2003
[2019-04-16 12:32:19] connectclient: connected port 2000 to 127.0.0.1
[2019-04-16 12:32:19] ilcOpen: called
[2019-04-16 12:32:19] ilcSruActiveList: running with SRU config file /home/jum/wdir/ilcdaq/config-v10.1/sru.cfg
[2019-04-16 12:32:19] Interface: <eth0>, Address: <192.168.4.11> (C0A8040B), Broadcast: <192.168.4.255>
[2019-04-16 12:32:19] ilcSruActiveList:  ping sru_0 192.168.4.4 
[2019-04-16 12:32:19] ilcSruActiveList:  scSruScConnect returned with error 0
[2019-04-16 12:32:19] ilcSruActiveList:  dataSruScConnect returned with error 0
SRUID	STATUS	LINKUP	ACTIVE	CONTROLIP	PORT	LISTEN	READOUTIP
0	1	1	1	192.168.4.4	4097	4098	192.168.4.5
1	0	0	0	0.0.0.0	4097	4098	0.0.0.0
2	0	0	0	0.0.0.0	4097	4098	0.0.0.0
3	0	0	0	0.0.0.0	4097	4098	0.0.0.0
[2019-04-16 12:32:19] ilcOpen: read trigger configuration from /home/jum/wdir/ilcdaq/config-v10.1/trigger.cfg
[2019-04-16 12:32:19] ilcOpen: running with sru powerup file /home/jum/wdir/ilcdaq/config-v10.1/srupup-0.cfg
[2019-04-16 12:32:19] ilcOpen: mcmRespondCheck SRU 0
[2019-04-16 12:32:22] ilcInitRun: initialize begin
[2019-04-16 12:32:22] ilcInitRun: reading 
[2019-04-16 12:32:22] ilcInitRun: trigger is software 2
[2019-04-16 12:32:22] ilcInitRun: software trigger SRU_REG_CFG SRU 0 00000001
[2019-04-16 12:32:22] ilcInitRun: write software trigger SRU_REG_CFG SRU 0 00000001
[2019-04-16 12:32:22] readRunConfig: reading in run control config file /home/jum/wdir/ilcdaq/config-v10.1/run.cfg
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: running with ALTRO global config file /home/jum/wdir/ilcdaq/config-v10.1/global-altro.physics
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: SALTRO mode 1 needs 0sup 0 pedsub 0 zsenb 0 thr 0
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: zero suppression 0 pedestal subtraction 0 (dpcfg_zsenb = 0)
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: running for sruid 0 with config file /home/jum/wdir/ilcdaq/config-v10.1/sru-0.cfg
[2019-04-16 12:32:22] AltroLoadGlobal: FEC 1 (0)  ierr = 00000000
[2019-04-16 12:32:22] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_ZSTHR WRITING = 00000000
[2019-04-16 12:32:22] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_BCTHR WRITING  = 00000000
[2019-04-16 12:32:22] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_TRCFG WRITING  = 00000087
[2019-04-16 12:32:22] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_DPCFG WRITING  = 0007E000
[2019-04-16 12:32:22] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_BFNPT WRITING  = 00000000
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: number of ALTRO global errors for SRU 0 = 0
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: number of ALTRO active channel  errors for RCU 0 = 0
[2019-04-16 12:32:22] ilcSetActiveFrontEnd: number of pedestal errors SRU 0 = 0
[2019-04-16 12:32:22] ilcSetActiveFrontEnd:  lookup table status  SRU 0 LOOKUP 2 NOT LOAD = 2
[2019-04-16 12:32:22] ilcOpen: DAQ INIT STATUS 1
[2019-04-16 12:32:22] ilcOpen: run control is 1
[2019-04-16 12:32:39] performaction: from ilcserver *STATUS

[2019-04-16 12:32:39] performaction CONNECTION CLOSED 2
[2019-04-16 12:32:39] performaction: from ilcserver *POW 0

[2019-04-16 12:32:39] performaction: from ilcserver *PCA
[2019-04-16 12:52:32] performaction: from ilcserver *POW 5

[2019-04-16 12:52:32] ilcFecPowerOn: dummy returns current status
[2019-04-16 12:52:32] LoadLookupTables: running for sruid 0 with config file /home/jum/wdir/ilcdaq/config-v10.1/sru-0.cfg
[2019-04-16 12:52:32] altroWriteLookupTable: for TYPE = 2 DEST = 1 VERIFY = 1
[2019-04-16 12:52:32] altroWriteLookupTable *WARNING* SALTRO can not read back pedestal memory - force no verification
[2019-04-16 12:52:32] LoadLookupTables: lookup table status  RCU 0 LOOKUP 2 = 0
[2019-04-16 12:52:33] performaction: from ilcserver *PCA SR 128 DAC 500

[2019-04-16 12:52:33] ilcPcaLoadSettings loading PCA settings shiftreg: 80 dac: 500
[2019-04-16 12:52:33] statusOfFecReadout reading file: /home/jum/wdir/ilcdaq/config-v10.1/sru-0.cfg 
[2019-04-16 12:52:33] statusOfFecReadout reading file: /home/jum/wdir/ilcdaq/config-v10.1/sru-1.cfg 
[2019-04-16 12:52:33] statusOfFecReadout reading file: /home/jum/wdir/ilcdaq/config-v10.1/sru-2.cfg 
[2019-04-16 12:52:33] statusOfFecReadout reading file: /home/jum/wdir/ilcdaq/config-v10.1/sru-3.cfg 
[2019-04-16 12:52:33] ilcPcaLoadSettings:  loading PCA16 for  SRU: 0 value: 80
[2019-04-16 12:52:37] performaction: from ilcserver *START CONTROL 1 MODE 1 TYPE 0 LOAD 2

[2019-04-16 12:52:37] ilcOpen: called
[2019-04-16 12:52:37] ilcSruActiveList: running with SRU config file /home/jum/wdir/ilcdaq/config-v10.1/sru.cfg
[2019-04-16 12:52:37] Interface: <eth0>, Address: <192.168.4.11> (C0A8040B), Broadcast: <192.168.4.255>
[2019-04-16 12:52:37] ilcSruActiveList:  ping sru_0 192.168.4.4 
[2019-04-16 12:52:37] ilcSruActiveList:  scSruScConnect returned with error 0
[2019-04-16 12:52:37] ilcSruActiveList:  dataSruScConnect returned with error 0
SRUID	STATUS	LINKUP	ACTIVE	CONTROLIP	PORT	LISTEN	READOUTIP
0	1	1	1	192.168.4.4	4097	4098	192.168.4.5
1	0	0	0	0.0.0.0	4097	4098	0.0.0.0
2	0	0	0	0.0.0.0	4097	4098	0.0.0.0
3	0	0	0	0.0.0.0	4097	4098	0.0.0.0
[2019-04-16 12:52:37] ilcOpen: read trigger configuration from /home/jum/wdir/ilcdaq/config-v10.1/trigger.cfg
[2019-04-16 12:52:37] ilcOpen: running with sru powerup file /home/jum/wdir/ilcdaq/config-v10.1/srupup-0.cfg
[2019-04-16 12:52:37] ilcOpen: mcmRespondCheck SRU 0
[2019-04-16 12:52:40] ilcInitRun: initialize begin
[2019-04-16 12:52:40] ilcInitRun: reading 
[2019-04-16 12:52:40] ilcInitRun: trigger is software 2
[2019-04-16 12:52:40] ilcInitRun: software trigger SRU_REG_CFG SRU 0 00000001
[2019-04-16 12:52:40] ilcInitRun: write software trigger SRU_REG_CFG SRU 0 00000001
[2019-04-16 12:52:40] readRunConfig: reading in run control config file /home/jum/wdir/ilcdaq/config-v10.1/run.cfg
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: running with ALTRO global config file /home/jum/wdir/ilcdaq/config-v10.1/global-altro.physics
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: SALTRO mode 1 needs 0sup 0 pedsub 0 zsenb 0 thr 0
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: zero suppression 0 pedestal subtraction 0 (dpcfg_zsenb = 0)
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: running for sruid 0 with config file /home/jum/wdir/ilcdaq/config-v10.1/sru-0.cfg
[2019-04-16 12:52:40] AltroLoadGlobal: FEC 1 (0)  ierr = 00000000
[2019-04-16 12:52:40] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_ZSTHR WRITING = 00000000
[2019-04-16 12:52:40] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_BCTHR WRITING  = 00000000
[2019-04-16 12:52:40] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_TRCFG WRITING  = 00000087
[2019-04-16 12:52:40] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_DPCFG WRITING  = 0007E000
[2019-04-16 12:52:40] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_BFNPT WRITING  = 00000000
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: number of ALTRO global errors for SRU 0 = 0
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: number of ALTRO active channel  errors for RCU 0 = 0
[2019-04-16 12:52:40] ilcSetActiveFrontEnd: number of pedestal errors SRU 0 = 0
[2019-04-16 12:52:40] ilcSetActiveFrontEnd:  lookup table status  SRU 0 LOOKUP 2 NOT LOAD = 2
[2019-04-16 12:52:40] ilcOpen: DAQ INIT STATUS 1
[2019-04-16 12:52:40] ilcOpen: run control is 1
[2019-04-16 12:52:40] performaction: from ilcserver *POW 0

[2019-04-16 12:52:40] performaction: from ilcserver *PCA
[2019-04-16 12:53:41] performaction: from ilcserver *STOP
[2019-04-16 12:53:41] ilcClose: called
[2019-04-16 12:53:45] performaction: from ilcserver *START CONTROL 1 MODE 1 TYPE 3 LOAD 2

[2019-04-16 12:53:45] ilcOpen: called
[2019-04-16 12:53:45] ilcSruActiveList: running with SRU config file /home/jum/wdir/ilcdaq/config-v10.1/sru.cfg
[2019-04-16 12:53:45] Interface: <eth0>, Address: <192.168.4.11> (C0A8040B), Broadcast: <192.168.4.255>
[2019-04-16 12:53:45] ilcSruActiveList:  ping sru_0 192.168.4.4 
[2019-04-16 12:53:45] ilcSruActiveList:  scSruScConnect returned with error 0
[2019-04-16 12:53:45] ilcSruActiveList:  dataSruScConnect returned with error 0
SRUID	STATUS	LINKUP	ACTIVE	CONTROLIP	PORT	LISTEN	READOUTIP
0	1	1	1	192.168.4.4	4097	4098	192.168.4.5
1	0	0	0	0.0.0.0	4097	4098	0.0.0.0
2	0	0	0	0.0.0.0	4097	4098	0.0.0.0
3	0	0	0	0.0.0.0	4097	4098	0.0.0.0
[2019-04-16 12:53:45] ilcOpen: read trigger configuration from /home/jum/wdir/ilcdaq/config-v10.1/trigger.cfg
[2019-04-16 12:53:45] ilcOpen: running with sru powerup file /home/jum/wdir/ilcdaq/config-v10.1/srupup-0.cfg
[2019-04-16 12:53:45] ilcOpen: mcmRespondCheck SRU 0
[2019-04-16 12:53:49] ilcInitRun: initialize begin
[2019-04-16 12:53:49] ilcInitRun: reading 
[2019-04-16 12:53:49] ilcInitRun: trigger is software 2
[2019-04-16 12:53:49] ilcInitRun: software trigger SRU_REG_CFG SRU 0 00000001
[2019-04-16 12:53:49] ilcInitRun: write software trigger SRU_REG_CFG SRU 0 00000001
[2019-04-16 12:53:49] readRunConfig: reading in run control config file /home/jum/wdir/ilcdaq/config-v10.1/run.cfg
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: running with ALTRO global config file /home/jum/wdir/ilcdaq/config-v10.1/global-altro.physics
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: SALTRO mode 1 needs 0sup 1 pedsub 1 zsenb 0 thr 5
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: zero suppression 1 pedestal subtraction 1 (dpcfg_zsenb = 0)
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: running for sruid 0 with config file /home/jum/wdir/ilcdaq/config-v10.1/sru-0.cfg
[2019-04-16 12:53:49] AltroLoadGlobal: FEC 1 (0)  ierr = 00000000
[2019-04-16 12:53:49] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_ZSTHR WRITING = 00000005
[2019-04-16 12:53:49] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_BCTHR WRITING  = 00000000
[2019-04-16 12:53:49] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_TRCFG WRITING  = 00000087
[2019-04-16 12:53:49] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_DPCFG WRITING  = 0007E000
[2019-04-16 12:53:49] AltroWriteGlobal: FEC 0 CHIP 7 ALTRO_BFNPT WRITING  = 00000000
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: number of ALTRO global errors for SRU 0 = 0
[2019-04-16 12:53:49] AltroDisableZeroSup: *WARNING* disabled 1 chips from zero suppresion
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: number of ALTRO zerosupression  errors for RCU 0 = 0
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: number of ALTRO active channel  errors for RCU 0 = 0
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: pedestals read in from /home/jum/wdir/ilcdaq/config-v10.1/pedestals-0-80-500.dat
[2019-04-16 12:53:49] ilcSetActiveFrontEnd: number of pedestal errors SRU 0 = 0
[2019-04-16 12:53:49] ilcSetActiveFrontEnd:  lookup table status  SRU 0 LOOKUP 2 NOT LOAD = 2
[2019-04-16 12:53:49] ilcOpen: DAQ INIT STATUS 1
[2019-04-16 12:53:49] ilcOpen: run control is 1
[2019-04-16 12:53:49] performaction: from ilcserver *POW 0

[2019-04-16 12:53:49] performaction: from ilcserver *PCA
[2019-04-16 12:53:53] performaction: from ilcserver *STOP
[2019-04-16 12:53:53] ilcClose: called
[2019-04-16 16:13:33] disconnectclient: 1 close  15
[2019-04-16 16:13:33] disconnectclient: 1 close  15
[2019-04-16 16:13:33] disconnectclient: 1 Close client: 15
[2019-04-16 16:13:33] disconnectclient: 1 Closeerror client: 15
