pfwiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Printing ======

Printing is provided in two different ways:

  * For machines connected to the network via **cable**, print queues are provided by the //CUPS// server ''cups.hep.lu.se''. Machines should connect to it to print. 
    * **Clusters** and **Workstations** are automatically connected to all the printers served by it. **No installation is needed.**
    * Laptops with cable connection might **install the printers** [[#Installation if connected via ethernet cable| following these instructions]]

  * **Wireless printing is disabled for security reasons.**<del>For machines connected to the network via **wireless**, one must connect **directly** to each printer and configure it.
    * [[#Installation_if_connected_via_Wireless|Click here for installation instructions]]</del>

===== About the available printers =====

The following print queues are available from the Linux computers:

^ Printer Name ^ Duplex ^ Colour ^ Paper size ^	Location            ^ Notes               ^ hostname ^
^ lw1          | Yes    | No     | A4         | Room A404          |                     | lw1.hep.lu.se |
^ clw2         | Yes    | Yes    | A4         | Room A404          |                     | clw2.hep.lu.se |
^ Ricoh        | Yes    | Yes    | A3/A4      | Entré - Fysikum Reception | :!: Printing on this machine will be billed to our division. Use only if strictly needed. | fysik-printer.fysik.lu.se |
^ :::        | :::    | :::    | :::      | ::: | This machine is only accessible from workstations. To access it with other machines contact Florido. | ::: |


The printer ''lw1'', is the **default** printer. It will be used if no printer is specified.


===== How to print =====

==== Workstations and Clusters ====

=== Using a graphical interface ===

Nowadays most of printing from workstations can be done via graphical tools.
The KDE and Gnome environments provide their own intuitive tools, so these will not be described here.

=== Using the command line ===

On clusters and servers this might not be straightforward. Therefore the following command line instructions apply.

== List available printers ===

  lpstat -a

<code>tjatte:~> lpstat -a
clw1 accepterar begäran sedan tor 27 mar 2014 15.56.09
clw1_trans accepterar begäran sedan mån 31 mar 2014 06.33.55
clw2 accepterar begäran sedan mån 31 mar 2014 13.36.56
lw1 accepterar begäran sedan mån 31 mar 2014 11.08.59
lw4 accepterar begäran sedan mån 31 mar 2014 10.03.26
Ricoh accepterar begäran sedan tis 25 feb 2014 20.23.31

</code>

== Standard usages ==
To print a document "file.ps" to the default printer, use

  lpr file.ps

To print to another printer (newprinter in this example) use

  lpr -P lw1 file.ps

To see what is in the print queue

  lpq
  lpq -P clw2

To remove all your printouts from the queue

  lprm -
  lprm - -P clw2

== Duplex/simplex ==
Printers that are able to print duplex, do that by default, and are flipping the page along the long edge.
To print in simplex (only on one side of the paper)

  lpr -o sides=one-sided file.ps

To print on both sides and flip along the short edge

  lpr -o sides=two-sided-short-edge file.ps

To print on both sides and flip along the long edge (default)

  lpr -o sides=two-sided-long-edge file.ps

== Print only selected pages ==

  lpr -o page-ranges=4 file.ps
  lpr -o page-ranges=1-8 file.ps
  lpr -o page-ranges=1,3,6 file.ps

== Pretty printing ==

  lpr -p file.ps
or
  lpr -o prettyprint file.ps

Specifies that the file should be formatted with a shaded header with the date, time, job name, and page number. This option is only useful when printing text files.

== Print more on each paper ==
To print two pages on each side of the paper

  lpr -o number-up=2 file.ps

And to get in even more on the paper

  lpr -o number-up=4 file.ps

You can also use 8 and 16. But can you read it?

== Rotate ==
To rotate the page 90 degrees and print it in landscape orientation

  lpr -o landscape file.ps

In most cases it is better to create the file in landscape orientation.

== Mirroring ==

  lpr -o mirror file.ps

Might be useful if you want to print something that Leonardo D. has written.
Combining options
You can combine the options, like in the following example

  lpr -P lw1 -o prettyprint -o number-up=2 file.ps

== Other useful utilities ==
ps2ps can do a lot of tricks on a postscript-file. It is used in the background of the printing system to handle many of the options above, but can be used directly on a file. ps2ps can sometimes be used to "clean up" ps or eps files originating from other systems.
psbook is useful to rearrange the pages in a ps-file in such a way that when printed, you can fold the papers around the middle, and you have got a book. Or at least a booklet. Se man psbook for more information.
gv or ghostview, is the number one program to check a ps-file before printing it. It can save many trees


==== To check the print server status ====

On the Linux system the printing is handled by a central print-spooler. The spooler queues, format (if necessary) and send the file to the printer. The spooler is in our case called cups.
In the normal case the file you want to print should be a postscript-file.

It is possible to print files that are not in postscript. One typical format is "text", but even a lot of other formats is possible. The spooler takes care of the file, and try to do its best to convert it to postscript before it is sent to the printer. However, in most cases, I recommend that you convert the files to postscript yourself.

The print server status can only be seen when connected via **cable**.

Click this link: http://cups.hep.lu.se:631/

----
===== Installation =====

Check if you're connected via cable or wireless. Installation 
instructions are completely different.

==== Installation if connected via ethernet cable ====

**Linux laptops** and **Apple or Windows machines** would need to install all the printers manually.

=== GNU/Linux ===

Get to the print room where the printer is located and note the printer Model Name and hostnames. You will need those later.

There are four ways of installing the drivers:

== 1) Safe and Tedious (recommended) ==
Root privileges: not needed

use your printer system configurator to add the printer. It may vary depending on distributions.

When asked for the printer, choose to add a **network printer** and type in the URL:

  ipp://cups.hep.lu.se:631/printers/<printername>
  
e.g.

  ipp://cups.hep.lu.se:631/printers/lw1
  
Repeat the above for each printer you want to add.

This should not require drivers, as they are provided by the CUPS server.

Test with ''lpstat -a'', you should see the list of configured printers.

== 2) Quick and Advanced (recommended for experts) ==
Root privileges: needed

The printers can be added directly to the current cups configuration using a configuration file.
:!: **Be careful**: backup ''/etc/cups/printers.conf'' before you proceed.

Follow these steps:
  - become root and shut down cups (may vary depending on distribution): <code>sudo service cups stop</code> 
  - download {{ :it_services:pf:printers.conf.tar.gz | this file}} and extract it somewhere.
  - merge or add the contents of the file at the end of your ''/etc/cups/printers.conf'' file and save.
  - restart cups <code>sudo service cups start</code>
  - test with ''lpstat -a'', you should see the list of configured printers.

== 3) Hackish and Fastest ==
Root privileges: needed

:!: This solution might prevent you to use printers outside the Particle Physics division. Use it only if you know where to put your hands.

Follow these steps:

  - become root and shut down cups (may vary depending on distribution): <code>sudo service cups stop</code> 
  - add this line to ''/etc/cups/client.conf'' (create it if it doesn't exist): <code>ServerName cups.hep.lu.se</code>
  - test with ''lpstat -a'', you should see the list of all configured printers.

If you use this, remember to comment out the ServerName line in client.conf and restart cups if you travel to a  location outside Particle Physics.

== 4) Evil and Time-consuming ==
Root privileges: might be needed if you need to install new drivers

:?: Why is this evil? because this bypasses the print server. That means that is more likely to jam the print queue in the printer itself (will need a restart) and jam the printer itself if the driver is misconfigured (hopefully a restart will be enough LOL). Use at your own risk.

Install the printer drivers yourself, and then install the printer by getting its network address.

This may vary depending on the printer vendor, and Linux may or may not have the drivers.

In short, all you need to do is to provide the hostname of the printer. In most cases it will work if you use

  socket://<printer FQDN>:9100
or
  http://<printer FQDN>
  
e.g.

  socket://lw1.hep.lu.se:9100
  http://lw1.hep.lu.se

=== Windows ===

I will write them when I have time. For the moment being, the only thing I can suggest is:

  - Go to Printers and Faxes and add a new printer
  - When asked for a new printer, select network printer (TCP/IP)
  - Add the printer this way: <code>http://cups.hep.lu.se:631/printers/printername</code> e.g. <code>http://cups.hep.lu.se:631/printers/lw1</code>
  - You will be asked for drivers. If you're lucky, they're on Windows Update, if you're not, find them yourself by looking at the vendor's website.
  - When the drivers have been installed, you should be able to use the printer.

=== MacOS X ===

No idea. OSX uses the same CUPS system as linux ,so I guess it's easy. If anybody wants to write this, contact me.

----

==== Installation if connected via Wireless ====

The best is to book a time with me if you need to install.

If you really want to do yourself:

Root/Admin privileges: might be needed if you need to install new drivers

Install the printer drivers yourself, and then install the printer by using its hostname.
When choosing the printer driver, I suggest either PS or PCL. The result may vary depending on the printer.

This may vary depending on the printer vendor, and Linux may or may not have the drivers.
A list of tested working drivers is provided [[#Drivers|here]]

All you need to do is to provide the hostname of the printer. In most cases it will work if you use

  socket://<printer FQDN>:9100
or
  http://<printer FQDN>
  
e.g.

  socket://lw1.hep.lu.se:9100
  http://clw2.hep.lu.se


----

===== Drivers ===== 

==== HP Laserjet 600 M601 M602 Black&White ====

Hostname: ''lw1.hep.lu.se''

One must accept the license to download these drivers.

If the links below are outdated, please refer to the main source on the HP website: [[http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5254096&lang=en&cc=us#Z7_3054ICK0K8UDA0AQC11TA930S6|HP page]]

  * For **MS Windows**: Choose the proper Windows version (7/8/10) and architecture (32bit/64bit))
    *  I recommend the PCL6 driver for maximum control on the device
      * [[http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5254096&swItemId=ds_99374_16&swEnvOid=4063|Win 7 64bit here]] 
      * [[http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5254096&swItemId=ds_99374_16&swEnvOid=4192|Win 10 64 bit here]]
    * or the Universal PS driver if you need to print PS or DVI documents as well 
      * [[http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5254096&swItemId=ds_99376_16&swEnvOid=4063|Win 7 64bit here]]
      * [[http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5254096&swItemId=ds_99376_16&swEnvOid=4192|Win 10 64 bit here]]
  * For **Mac OS X** : [[http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5254096&swItemId=lj_98930_1&swEnvOid=219|Here]]
  * For **GNU/Linux**: Drivers should be in the distribution repositories, but if not, follow the instructions here: [[http://hplipopensource.com/hplip-web/gethplip.html|HPLIP driver]]


==== HP Laserjet 500 color M551  ====

Hostname: ''clw2.hep.lu.se''

One must accept the license to download these drivers.

  * For **MS Windows**: [[http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4184891&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dlj_98544_2%257CswEnvOID%253D4063%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken| HP site ]]
  * For **Mac OS X**: [[http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4184891&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dlj_126159_2%257CswEnvOID%253D219%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken| HP site ]]
  * For **GNU/Linux**: Drivers should be in the distribution repositories, but if not, follow the instructions here: [[http://hplipopensource.com/hplip-web/gethplip.html|HPLIP driver]]
pfwiki

User Tools

Site Tools

Page Tools
