pfwiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== MegaRAID storCLI quick reference  ======

binary usually located in ''/opt/MegaRAID/storcli/storcli64''

===== Useful commands =====

==== Find controller id ====

<code bash>storcli show all</code>

==== List all controller info ====

/c0 stands for controller with id 0

<code bash>storcli /c0 show all</code>

==== List all volumes info ====

<code bash>storcli /c0/vall show all</code>

==== List specific volume info ====

/v0 stands for volume with id 0

<code bash>storcli /c0/v0 show all</code>

==== Find enclosure ID ====

<code bash>storcli /c0/eall show</code>


==== List specific enclosure info ====

/e133 stands for volume with id 133

<code bash>storcli /c0/e133 show all</code>

==== Find Physical drives IDs ====

<code bash>storcli /c0/e133/sall show</code>

==== Get specific Physical drive info ====

GHS = Global Hot Spare

<code bash>storcli /c0/e133/s0 show all</code>

<code bash>storcli /c0/pall show all</code>
==== Create Volume ====

details:
  * raid6
  * name alicedisk
  * drives: enclosure:drive 0 to 6
  * Strip: 1MB

<code bash>storcli /c0 add vd r6 name=alicedisk drives=133:0-6 Strip=1024</code>

==== Check background activity ====

Usually initialization or rebuild. Weird thing is that initialization is not shown properly when in background mode.

<code bash>storcli/c0/v0 show bgi</code>
<code bash>storcli/c0/v0 show init</code>

==== setup hotspare ====

One needs to identify the enclosure for this to work and list all physical drives.

This adds s7 

<code bash>storcli /c0/e133/s7 add hotsparedrive</code>

==== Consistency check status (remember to schedule!) ====

<code bash>storcli /c0 show cc</code>
pfwiki

User Tools

Site Tools

Page Tools
