Svenska:

Den här webbplatsen kan endast nås som arkivreferens. Innehållet gäller gamla avdelningen för partikelfysik. Verksamheten fortsätter vid avdelningen för partikel- och kärnfysik https://www.particle-nuclear.lu.se

Sidan nedan slutar uppdateras fr.o.m. 2020-09-22 och uppfyller endast delvis tillgänglighetsdirektivet. Se tillgänglighetsredogörelsen

English:

The webpage you reached is made available for archiving purposes only. The content refers to the former division of particle physics. The activity continues within the division of Particle and Nuclear physics https://www.particle-nuclear.lu.se

The page below is not updated any longer since September 22, 2020 and does not conform completely to the accessibility regulation. See the accessibility statement

Pedestals for gains (g0=12mv/fC,g1=19,g2=15,g3=27), polarity=p0/p1

Ramp tests (p1=up,p2=down,p13=alternate)

text summary (number of times channel found, number of erratic data):
mcm103-2C14-pattern-p1-test1.txt
mcm103-2C14-pattern-p2-test1.txt
mcm103-2C14-pattern-p13-test1.txt
Ramps in pdfplots:
mcm103-2C14-pattern-p1-test1.pdf
mcm103-2C14-pattern-p2-test1.pdf
mcm103-2C14-pattern-p13-test1.pdf

Refvoltage tests

Test	refn	refcm	refp
refv0:	50	375	700
refv1:	70	375	700
refv2:	90	375	700
refv3:	110	375	700
refv4:	125	375	675
refv5:	75	375	675
refv6:	75	375	725
refv7:	75	0	675

csv/pdf file summary:
mcm103-2C14-refv-g0-s0-p1-test1.ped.csv
mcm103-2C14-refv-g0-s0-p1-test1.ped.csv.pdf
Pedestals in pdf:
mcm103-2C14-refv0-g0-s0-p1-test1.pdf
mcm103-2C14-refv1-g0-s0-p1-test1.pdf
mcm103-2C14-refv2-g0-s0-p1-test1.pdf
mcm103-2C14-refv3-g0-s0-p1-test1.pdf
mcm103-2C14-refv4-g0-s0-p1-test1.pdf
mcm103-2C14-refv5-g0-s0-p1-test1.pdf
mcm103-2C14-refv6-g0-s0-p1-test1.pdf
mcm103-2C14-refv7-g0-s0-p1-test1.pdf
Pedestals in text:
mcm103-2C14-refv0-g0-s0-p1-test1.ped
mcm103-2C14-refv1-g0-s0-p1-test1.ped
mcm103-2C14-refv2-g0-s0-p1-test1.ped
mcm103-2C14-refv3-g0-s0-p1-test1.ped
mcm103-2C14-refv4-g0-s0-p1-test1.ped
mcm103-2C14-refv5-g0-s0-p1-test1.ped
mcm103-2C14-refv6-g0-s0-p1-test1.ped
mcm103-2C14-refv7-g0-s0-p1-test1.ped

Pulser with different shapers (s0=120ns,s1=90ns,s3=60ns,s7=30ns)

Pulser with different clocks (clk0=20MHz,clk1=10MHz,clk3=40MHz)

summary csv/pdffiles of pulser channel 1&2 (s3)
mcm103-2C14-clocks-ped0-thr0-g0-s0-p1-s3.csv
mcm103-2C14-clocks-ped0-thr0-g0-s0-p1-s3.csv.pdf

csvfiles pulser channel 1&2 (s3)
mcm103-2C14-clk0-ped0-thr0-g0-s0-p1-s3.csv
mcm103-2C14-clk1-ped0-thr0-g0-s0-p1-s3.csv
mcm103-2C14-clk3-ped0-thr0-g0-s0-p1-s3.csv

pdffiles pulser channel 1&2 (s3)
mcm103-2C14-clk0-ped0-thr0-g0-s0-p1-s3-1-100-test1-pulse.pdf
mcm103-2C14-clk1-ped0-thr0-g0-s0-p1-s3-1-100-test1-pulse.pdf
mcm103-2C14-clk3-ped0-thr0-g0-s0-p1-s3-1-100-test1-pulse.pdf

Zerosuppressiom with different clocks (clk0=20MHz,clk3=40MHz) pedsub (50,100), threshold (50,150)

summary csv/pdffiles of pulser channel 1&2 (s3)
mcm103-2C14-clocks-ped100-thr100-g0-s0-p1-s3.csv
mcm103-2C14-clocks-ped100-thr100-g0-s0-p1-s3.csv.pdf
mcm103-2C14-clocks-ped50-thr150-g0-s0-p1-s3.csv
mcm103-2C14-clocks-ped50-thr150-g0-s0-p1-s3.csv.pdf

csvfiles pulser channel 1&2 (s3)
mcm103-2C14-clk0-ped100-thr100-g0-s0-p1-s3.csv
mcm103-2C14-clk0-ped50-thr150-g0-s0-p1-s3.csv
mcm103-2C14-clk3-ped100-thr100-g0-s0-p1-s3.csv
mcm103-2C14-clk3-ped50-thr150-g0-s0-p1-s3.csv

pdffiles pulser channel 1&2 (s3)
mcm103-2C14-clk0-ped100-thr100-g0-s0-p1-s3-1-100-test1-pulse.pdf
mcm103-2C14-clk0-ped50-thr150-g0-s0-p1-s3-1-100-test1-pulse.pdf
mcm103-2C14-clk3-ped100-thr100-g0-s0-p1-s3-1-100-test1-pulse.pdf
mcm103-2C14-clk3-ped50-thr150-g0-s0-p1-s3-1-100-test1-pulse.pdf

Global reset

compare SALTRO registers after poweron, loaded, global reset

poweron.txt: register read after power on
ppweron.diff: difference between expected and read
loaded.txt: register read after writing registers
loaded.diff: difference between expected and read
grst.txt: register read after global reset
grst.diff: difference between expected and read

Differences: file should be empty if no errors
saltro-mcm103-2C14-poweron.diff
saltro-mcm103-2C14-loaded.diff
saltro-mcm103-2C14-grst.diff

Read SALTRO registers:
saltro-mcm103-2C14-poweron.txt
saltro-mcm103-2C14-loaded.txt
saltro-mcm103-2C14-grst.txt

Temperature, ADC, DAC

These files contains data for different actions and settings:
Temperature: mcmtemp.csv - temperature as read on MCM card
ADC: readadc.csv - voltages currents, referance voltages
DAC: readdac.csv - DAC settings

Actions
Not all actions is used in test.

number	action
0:	no action - test
1:	power is off before test
2:	after power on before test
3:	after mcminit before test
4:	saltro bias on, pasa shutdown
5:	saltro bias off, pasa on
6:	saltro bias on, pasa on before a run
7:	saltro bias on, pasa on after a run
8:	saltro bias off, pasa shutdown after run
9:	after power off
10:	before SRU init

Settings

Test	digit5	digit4	digit3	digit2	testid
Pedestal	-	-	polarity	gain	1
Ramp	-	-	-	pattern	2
refvoltages	-	-	-	refvN	3
shapers	pulser	clk	polarity	shaper	4
clocks	pulser	clk	polarity	shaper	5
zerosupression1	pulser	clk	polarity	shaper	6
zerosupression2	pulser	clk	polarity	shaper	7

zerosupression1: pedestal=50,threshold=150
zerosupression1: pedestal=100,threshold=100
mcmtemp.csv
readadc.csv
readdac.csv

CPLD I2C test

esult from test of I2C to CPLD
testi2c.csv